Fault and repair guide
No reel rotationThis is a very common problem which plagues all Sanyo machines and can have several causes. The first thing which fails is usually the reel idler assembly. Replacement units are readily available and can be fitted easily after removal of the cassette carriage. Next thing to check is the drive belt connecting the motor to the idler assembly. Finally suspect failure of the motor itself.
Quick fault guidePlease click on the button if you are able to contribute a solution to this list or would like to add to, or update PALsite's information on this model. Please note, questions will be removed.
If you have a question about this model, please raise it on the chatpage.
|Loss of audio||Check C08 (2.2uF 50V) in the audio block for O/C|
|No rewind and no forward. Eats tape when ejecting||Replace all belts and renew the idler and small belts too.|
|Wrong values not 2.2 uF but 22uF||The capacitor is not 2.2uF but 22uF 16v|