Please note, the chat page system used by PALsite stores a cookie in your browser holding your registered name and e-mail address for posting.
No further use is made of this information by the system.
If you are having problems posting on this page (or getting error 520), try using the http version instead of the https one or submit details here of what problem you are seeing, thanks.
|◄previous||new post ✚ refresh ↻||▼|
This is kind of an urgent SOS for my Sony UVW-1800 Betacam SP deck. I bought this one on eBay strictly for the purpose of transferring old TV studio Betacam tapes to dvd, before they disintegrate. I am about to return it as defective unless someone can tell me what I'm doing wrong: So far my experience with video equipment has only been VCR's and DVD recorders, so to me Betacam SP is a new animal. I'm attempting to copy tapes using the s-video output and the stereo XLR audio outputs. Audio sounds great, but for video I just get a flickering orange screen. I tried connecting to the s-video input of a dvd recorder, a vcr, and also direct to a test monitor. Same orange screen and no video signal. I tried a couple of different tapes, and a few different cables. The UVW-1800 was advertised as tested and working perfectly. It looks like new and only has 302 hrs on the drum. It loads, ejects, plays, rewinds, fast forwards perfectly. So that's why I'm thinking it's something I'm doing (or not doing). I don't have the right cables to copy using the BNC component video outputs, so I can't test that way. But s-video should work, shouldn't it? The seller told me he tested the s-video. I asked exactly how he tested, have not yet received a reply. The thing weighs like 100 pounds so I'd rather not have to return it. But I only have a few more days to test before my return time period expires. Please tell me it's just something stupid that I haven't thought of! Thanks in advance for any help. ---Erroll
Oh no! this is the Betacam chat page I am sleep
But I have a question:
The Betacam digital, SX, IMX and HDCAM tapes can be used in the Betacam SP vcrs for record and play?
Chris Margrave-Gregory the Hdcam tapes are similar of Betacam SP tapes better put in the Betacam chat page
I am looking to buy a number of Sony JH3 VTR's - Please let me know if you have any available for sale.
My direct email is [email protected] or my phone number is +44 (0)1932 240305.
Very much looking forward to you.
I have the Sony UVW-1800P
The part of the problem is where are the converts Y and B-Y R-Y (CTDM) to digital and after analogic output of the video
The problem is in the Y output, composite video and S video (these use the same Y) has the lines moving as out of sync the B-Y and R-Y run correct I saw in my oscilloscope
I put a image:
I have other UVW-1800P without Y in the output of the video
is same of the output of A/D D/A
This a frequent problem?
I am looking to BUY a number of Sony JH3 VTR's
Please let me know what you have available and if you are interested in selling.
my email is [email protected] or call me on +44 (0)1932 240305
I am new in a "Betacam technology" and I tried digitized some Betacam SP tapes..result is visually good, but I have some problem with stability of picture (lines) and I don't know if it is normal for this technology or I am doing something wrong.
I tried two players DVW-A510P and HDW-M2000, recorded via SDI (Blackmagic shuttle) but same result.
Here is a sample what I am meaning:
Will be same result with SP players?
Thank you for any idea or information about it
I was seeing the overall schema from the Sony BVW-50P and in the dub output exist the Y, B-Y, R-Y and also the Y direct from de demodulator in 1 wire and the B-Y and R-Y direct from de demodulator in only 1 wire CTDM
These 5 signals are in all videos with dub inputs and outpus?
The dub has more quality that the BNC outputs?
I put a page from the overall:
https://printable-classific.000webhostapp.com/sony bvw-50 overall.pdf
I could extract the pdf pages:
I have Betacam Digital, IMX and HDcam new cheap I can send to worldwide
Roderick I found a pdf with info of the tapes, I convert to image because is protected:
I open the tabs in the 3 tapes, I record 1 minute and play correct
I put scotch tape in the hole 15 and 12, the betacam SP has the 2 and 3 opened and the 4 and 6 closed
The UVW-1800 is a very finicky machine that only likes Betacam SP.
There is a 99% change it will just spit out the tapes...
Hello, can I use these tapes in the Sony UVW-1800P?
DIGITAL BETACAM METAL PARTICLE
HDCAM CERAMIC ARMOR METAL PARTICLE
All has similar of the Betacam SP big but with differents holes for the detector, perhaps if I make the correct holes works good
I put the message in other page because here not works
Ok Roderick in this page say that the error 93-000 is Servo reference sync signal cannot be detected
But is rare that this error only appears with signals from vhs and Betamax
and not with a dvd and dvb composite video outputs
You or somebody that has a Betacam video can connect a vhs or Betamax to Betacam for see if appears this error?
There is a problem with the reference sync. Can be many causes, you'll need to get a copy of the service manual.
Here's a link to the error codes for the machine: http://www.betaservice.ru/repair/errorcodes/er_uvw1xxx.htm
I have the Sony UVW-1800P and when I connect in the composite video input a video VHS or Betamax and the video composite output (Super) to tv appears the message "Not is a standard signal" and the error code 93-000
The image appears with horizontal lines tremble only the colour
I connected the Reference video input, is the same of the composite video input
These videos vhs and Betamax works good if I connect to the tv direct
If I connect a tdt or dvd signal to the Betacam composite input it works good
All the videos and the tv are PAL
Is normal that happen this?
Because these things can get very complicated, best thing to do is download the service manual from the link I listed.
That will give you some idea what the problem is and you can then decide if you can fix it yourself or if you need professional help.
Let us know how you go.
Roderick gute idee, defective display
right defect 92
how to continue?
Hey guys, very new to this. I have a BVV-5 VTR and a couple tapes I want to watch for it. The only problem is, right now I can either buy a playback adapter, which would cost me and I dont have another power supply, or I could buy and actual unit, such as the BVW-75 or a UVW-1800 but those are also extremely expensive for my budget. Is there a way to get any signal out of the PB adapter or is that a no-go?
Venca, it looks like a rebadged Sony DVW-500 DigiBeta machine.
The strange thing is, there is actually no 'Error 52' but there is an 'Error 92'. Could it be that the display is faulty?
Best way to find out is to connect a monitor to Video Output Composite 3. That will show more information about the error.
Here is a link to a service manual: http://diagramasde.com/diagramas/otros2/dvw-a500p1.pdf
|◄previous||new post ✚ refresh ↻||▲|