Has anyone got an Instruction manual for a Ampex VR5103 video recorder, or any information on this unit, or where I can obtain any information on this recorder

hi

PLEASE HELP!!!!! Just got a Sony VO5850, signals pass through, all functions work, except RECORD doesn't work when the tape is in it. Record light lights up when pressed only when tape is out. I WOULD REALLY appreciate your response!! Many Thanks!!

Hi Tom, I think you should search for a standard CCU/VTR cable on E-Bay. I'm not really sure what connector is used on the M7 and the VO8800. How many pins do the "big" connectors on either have? SP quality with a TBC is rock solid, so if the portable is working properly you're supposed to be blown away :)

Eric, Thanks again. The CCU-VTR cable is 16 pin to 26 pin. I am surprised to be having so much trouble finding these. Maybe everyone is holding on to them, since they are out of date?

I also am having difficulty finding the 4 pin DC cables for both the camera and the VO8800.I can buy an AC to DC converter easy enough, but can't find the female four pin XLR plugs to mate up with the Sony equipment.

If you have any tips for me, I'll Appreciate it.

Thanks again.

Tom

Tom:

You shouldn't have any problems finding 4-pin XLR plugs, they are quite common. But if all else fails, there is a lead for auction on eBay:http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=2988275810&category=21165

PLEASE HELP! How do I get a vo5850 out of standby mode?? This is driving me insane!Thanks to all for answering my previous question. I can't believe how many people are on this string!

Hi Tom, the power XLR is used very commonly today. Just go to Radio Shack and ask them anything that fits :) Only pin 1 and 4 are used. I'll have to look it up which one was + and which one is - though.

you might first want to check if the portable is working properly before buying an expensive cable. Yes, they are quite rare nowadays, some local TV stations are willing to pay serious money for a good working CCU cable.

Power the portable up (you might want to use a car battery or some old laptop or PC power supply) and insert tape. Use the composite in/outputs to check if the portable plays/records without "tape slack"-warnings and all that. If you can't get it to work, there's little use in buying a VTR cable until you can.

e.p.

Hey this site is very usefull thank u very much :))

<a href="http://travel.fworx.com/">Cheap Airline Tickets, Discount Hotels, Car Rentals, Destination Guides,Vacation Rentals</a>

I have for sale Panasonic W V-F200 CLE 3CCD NTSC with Camera Back Without Lensgood working Picture condition

have for sale Panasonic W V-F200 CLE 3CCD NTSC With camera back and veiwfinder without lensgood working picture condition

4 PIN NEUTRIK XLR CONNECTORS ON EBAY...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3801053891&category=35006

hi guys i want to take a camcorder underwater with housing andi need to built a I LANC controlerdo you have any informations (schematics web pages ?)that may help?

thanks in advance

giorgos

Greece

HiI need to software for convert AVI file to DAT file.Thanks.

I have a DXC-M7 that needs a new filter window (the greenish blue glass in front of the filter wheel). Does anyone have a source for these items?

Thanks.

Could somebody tell me how to read the head and drum hours on a BVH-3100?

Just remove all numbers from my email to reply.

ThanksRoderick

Some U-Matic for sale,VO5800PS,VO5850P,VP5030P,VO6800PS.and a RM440control unit.Sony camera DXC3000P,Fujinon lens 1:1.7/10-120,Case,Charger plus 4 BatteriesAll in good working order. Plus books and cables. in N.I.

I have two Sony bvu-800, the problen is that when i power the machine, the take up table or the take table, star spining and don't stop for around a hour, after finish spining everything work fine, a have a thrid machine for part,and i exchange all the board and nothing change, can somebody give me a idea were to look for? I have also the operation and maintenance manual for this machine if somebody need a copy. thanks

Hi can anyone help, I have a VO9000 which is creasing tapes. how can I cure it?thanks

hi i guess i finally got through.

e-mail me back at darylac aol @ i send one e-mail this is the 2nd so write back & we will see what pops up if u know what i mean ?????????????? tell all i will see them soon.so i may be talking to u & music soon ? who knows.

Graz asked, "PLEASE HELP! How do I get a vo5850 out of standby mode?? "

Don't know about this exact machine but a VP5030 I just aquired was also stuck. It turned out to be expecting a remote contol pad thus ignoring the front panel. It was stuck because the rear panel switch had fallen apart (probably been knocked hard in transport).

[Remove underscores and spaces]

If your umatic vcr is chewing tapes, always worth replacing the pinch roller with a nice new one and also cleaning the capstan shaft with alcohol.

Have some machines for sale:SONY VP-5040 LOW BAND PLAYER £95SONY V0-5630 LOW BAND RECORDER MULTI STD PB £225SONY VO-5800P LOW BAND RECORDER £275SONY VO-5850P LOW BAND EDIT RECORDER £350SONY VO-7630 LOW BAND RECORDER MULTI STD PB £275

All in excellent clean condition and good working order.

I PASS YOUR GOOD INFO SITE.I WILL BE BACK AGAIN

anyone know anthing about the johnichi 600atg-n torque wrench

HELLO I BOUGTH A VO-5800H, CAN SOME ONE KNOW HOW CAN I SEE COLOR IN THIS VIDEOHELP ME PLEASE

THANK U A LOT

No colour on this model, I'm afraid. The H signifies "HOSPITAL" model which is mono only used for recording operations etc. in hospitals for medical use.

Visit pccooper.co.uk for all your PC & Video stuff.

visit http://www.pccooper.co.uk for all your video an PC stuff.

I have an VO9850P forsale, the unit hasn't been tested.

I am wondering if anybody knows where I can order an inexpensive but good generic pinch roller that would fit a VO-5850 Sony U-Matic VCR. All I need is the roller itself. FYI, I live in the United States. Thanks!

http://www.adultshop.cc veri nice site

Sony VO-9800Can anybody tell me how to access the hours meter readings on this deck?thank youFRrank

hi i'm bac and u cant stop me!

HiI'm looking for some info on a cel-system p148if anyone has one please contact me

regards Roger

Hi Frank

First connect a monitor to the Monitor Output, not Video Out, of the machine. Switch the Counter/TC switch to Menu Dial. Then push the Search Dial, all 3 LED's light up.Turn the Search Dial whilst pushing down the Menu Button, this will set you through the menu's. Hours will be displayed in menu 205 & 206. If these menu's don't show, go to menu 200, push the Data button and turn the Search Dial to change the setting to Enhanced. Now you will see menu 205 & 206. Good luck

Roger - I used to have one of these CEL jobs. The company was taken over by Snell & Willcox about 12 years ago. Is it the keypad one or the touchscreen? Are the TBC's P147 -20 0r what? What do you need to know?

ArpeeHi it's the touch version i havent got a complete set just the touch and the p-148 whichhas an empty ic socket (n17) and wondering what ic should be there to see if the thing canproduce something more than a nice greenscreen

Roger - I have not a clue. I remember that the P148 had some extra boards in if it was used with the touchscreen as opposed to the keypad. I got rid of all that kit some time ago. If you check the Betacam chatroom I was engaged in discussions with some other members quite some time ago (look at the early entries) and maybe one of them may be able to help with a manual or something.

allo bonjour

My VO-9800 has recently started chewing tapes. It will edit fine for a while and then go into 'Error 02', which locks up the machine. After powering down and back up again, if I don't get it into 'Rewind' quickly, it starts chewing up the tape. It seems to happen more with KSP tapes than other tapes.Suggestions anybody?

Hi,

Ihave a BVT 500 TBC which is surplus to requirements, (that's the one which also converts low band to high band and verse vica)it's no use to me now,so if anyone needs it, let me know.

Regards.

For sellwww.videogeorge.bravehost.com/index.html

dead umatics retuned to life! low rates good umatics for sale.

I have a VO-8800 and a CA -30 Sony Betacam adapter. I need a 14 pin male connecter on the Vo-8800 side and a 26 pin female connecter on the CA -30 adapter side. Are there any cables out there that will meet my needs?

For Sellhttp://www.videogeorge.bravehost.com

Hi can someone give me the wiring diagram to connect a rm-440 to the parralel(centronics) connector on the bvu- u-matic?thanks

i would love to chat with someone

i love to chat with girl thay is a lot of fun .i like to chat with good looking girl thay love to chat with me becouse i look good

Hi from Canada! I have a Sony VO 5800 and sometimes the audeo will not record on the tape even though the meters move when doing the recording. When I play it back I have great picture but no sound sometimes, Would anyone know why this is and what I can do to fix it?

Oh, forgot to ask if anyone has manuals for a Sony VO 9800 and a EVO 9850. A pdf would be fine or word file.Thanks

I have a SONY VO-6800 Portable Video Recorder for sale with Kangaroo Bag & Manual.No battery.Check Ebay to bid or contact direct with your price.Item available on Ebay tillFriday April 2nd 2004

16.12 pm U.K. [email protected]

Is the "SP" format backwards compatible with a VO5850 recorder?

I bought two VO-8800 Sony U-Matic recorders from two different sellers. They have the same thing in common. WHen I put a tape in one, it does not load the tape, it just sits there and clicks. Any idea?

george "I bought two VO-8800 "perhaps your supply doesn't provide enough juice or has a too high impedencei've had the same problem with my 8800 and a 6800 and it turned out the impedence of my supply was too high (i've added a big elco an voila)

I Am looking for a Pal (analog ) Camcorder for 8 mm tape can any one sell me please?Many thanks.

Hi, Nice Weblog please visit my pages <a href="http://www.kreditkarten-tipp.de">Kreditkarten</a> . <a href="http://www.kaufsonline.de">Bü;cher, DVD gü;nstig einkaufen</a> finden sie hier. Und fü;r alle <a href="http://www.badado.de/odb">webverzeichnis</a> Fastenwanderer gibts hier <a href="http://www.fastenwandern-heppner.de">Fastenwandern</a> zu sehen. Greetings Joerg from Suisse.

Great site Please visit my site:http://www.easy-keyword.de

Can anyone please help? I need a Power supply for the following http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3806693402&category=3319&sspagename=STRK%3AMEBWN%3AIT&rd=1 Any help much appreciated. Ross

Hello, I'm looking for the user manual of the Sony VO-5800, 5850 and the RM440. Any help is really apreciated.Martin

I have Sony DXC-M7 (pal),I really need a manual, can anyone help? A scanned version is ok.This site is superb.

FOR SALE - JVC CR-6060ET U-Matic VCR on E-BAY auction until 12 April 2004.Link: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3089464028&category=39999Listed in category: Consumer Electronics > Collectables & Vintage > Video

I am doing some research into the format for the vendor, found the U-Matic PAL site and thought one of you may be interested.

Mike.

http://www.jungfrauen-sex.com

hi, ok. this is what i have so far.1 Sony BVU-110 with BK-112 Time based Generator1 Sony BVU-150 with BKU-150 TIME-CODE Generator attached to the front of it *see note below1 Sony VO-48001 Sony VO-6800 which has a damaged eject carriage. any one got a scrap one let me know.1 Sony VO-6800 (arrived today in the mail).1 Sony VO-8800

can i dubb my u-matic tapes on to VHS.* the note is for my TCR on my BVU-110 is that being there allow me to burn the time-code on to my recordings. is there any adapters for XLR->BNC so i can dubb sound with my recordings.

for the eject carriage please let me know how much you want for it and ill send a money order asap.

anyone have any VO-6800PS recorders. i'd love to hear for you.is there any facility on those VO-6800PS recorders which allow you to TCR your recordings or do i have to get that Option added. ("too dear for me at present").

anyway i have to go now.im on holidays starting today. ThanksClinton Radloff

SONY U-MATIC VO-5630 Tri Standard (NTSC, PAL, SECAM) deck for sale in NYC. Runs great. No manual, no remote. $100 + shipping.

Hi, I need ur assistance on Basic ways for logging on to a remote sys that uses NT OS. I tried the one I know but it did not go through. I shall be grateful for ur anticipated assistance and co-operation.Jonathan.

hello i want to join

After having been a user of Low Band U-Matic since 1976 - and an editor for TV jobs using a pair of 2750's with a Convergence ECS-1B edit controller between 1977 and 1980 (followed by a brand new VO5800 +5850 combo), I now have a massive archive of Lowband UMatic, BVU abd BVU-SP camera original masters, edit sub-masters, edit masters and general intermediate stuff that I need to digitise to DV and into NLE for archiving. I have the option of hiring a VO9600 (PAL), but the duration required for the hire would make it uneconomical, so I'm on the lookout to buy one such machine instead.

If anybody has, or knows of the availability of, one in good condition I'd be interested to know. One recently went for £100 on eBay, and that's the kind of money I'm looking to spend (bearing in mind that my old VO5850 cost £2,999 in 1981).

Any info most welcome.

Cheers

Colin (Milton Keynes, UK)

PS: You can leave a post in my webforum at http://forums.simplydv.co.uk if you prefer, otherwise email is fine.

Hi guys!

I thought it is an interesting chat site althought I have VTR/VCR drum units production for the replacement markets on sale for ALL Japanese brand models, and will like to see if there is any demand opportunities of exporting to Europe. Other Europe OEM models are alsohighly possible to produce for your demands if you can send me a sample. Lower production costs is ensured as we have production locations in Singapore, Malaysia and Indonesia.

Please send me your honest sincerce inquiries to my personal e-mail: [email protected]

Thanks & Cheers!Alson AngSingapore

Hey guys, can anyone tell me how I can get SMPTE off a vo-5600 recorder, so that I can tape picture and audio onto a 3/4"?

The Sonu U-Matic Series 5 Lowband machines didn't facilite a timecode track - only the VO9*** and BVU series machines did. What people used to do was to allocate one of the audio tracks to timecode striping and then use a reader to pick it up. This was often used in offline editing of 1" C and BVU/BVU-SP tapes. Lowband U-Matic machines only used Control Track, unless they were modified by companies like Hamlet of Chesham.

CB

alloooooooo

Does anyone know how to "trick" an SP player into thinking a non-SP 3/4" is SP so that it engages the Dolby NR? I have some reels that were xferred from Dolby 1" to 3/4" with the Dolby switch off, hence it needs to be encoded somehow. I'm using a BVU-950 and don't see anything in the menus about turning on Dolby by default etc. Any ideas???

Thanks in advance

For Sell Sony DXC M7 P 3CCD Pal Camera Without Lens very good condition asnew with Case

Hi folks, I'm wondering. What does the "ABL" switch on a Sony DXC M3A do? It's right next to the microphone level switch, so I thought it would do something like 'bandwidth limiting' or something. Tried that, but it made little difference.

sadasd

how do i get everything started on aol

OK, I'm back... with another question. By the way, thanks a lot for the answers about 'ABL' above. A week ago, I've been trying to connect a Sennheiser ME-66 mic to a Sony DXC-M3A. This is a fairly recent XLR shotgun mic, powered by a penlite. While the sound was ok, I've noticed that the sound starts clipping pretty badly at any level above someone talking. I suspected the portable first, but it looks like the camera can't handle the level at mic level. On line level, the output is (ofcourse) very low.

I've fixed it by soldering a 50k variable resistor in the camera and turning down the level. I've connected the 50k-pins to + and -, and the output runs where + used to run to. It sounds ok now, but I wonder if I've done everything the way I'm supposed to.

Thanks for any thoughts.

Hi, I sell my old professional VTR JVC BR-6400TR (VHS multi standard) in perfect conditions. 300 Euros.

Hi, I have the following kit for sale- ,VO8800P,DXCM7 camera,lens +transit case+ cables(£ 800 ono). In v.g.c. Also want offers for BVU50P, BVU110P with timecode.

<a href="http://www.a-3-versicherungsvergleich.de">krankenversicherung und versicherung</a><br>http://www.a-3-versicherungsvergleich.de

http://www.easy-keyword.deMir fehlen etwas die Worte...

I need access codes for Wilcom v6.0 with:

HASP ID: 2019719620-2a93Old ID Code: HBSF GWWWY DBIK

Many thanks for help

For Sell Panasonic W V F 200 CLE Camera 3CCD NTSC with Back of it and View FInder http://www.videogeorge.bravehost.com

I Have a Canon MV100 and I've got a firewire connection problem on Windows XP homeit did see it to begin with but, no more. It seems I need a driver for it but can'tfind one. I've tryed uninstalling 1394 in the device manager and updating generic driverbut no joy. I've searched through canon site no reference at all to MV100If anybody can help!Thanks for any replies.

http://www.handy-handys-zubehoer.de

Sony umatic VCRs at gr8 prices, let us know what model you need (no portables) ! All machines supplied with 30 day warranty.

http://adultdvd.jp/

Anybody here know if it's still possible to buy a viewfinder for my trusty old sony ccd-v200e? Price not that important, any help really appreciated.

I have bought a VO6800PS from ebay, finally got a tape, finally found i needed more watts to make it lace up. All fine so far, it will play, fast forward and rewind but wont record because the pause remains on and wont swicth off using the pause button. I think Ive seen this before on here. Does it need to be triggered from the camera ( i dont have a umatic cord just video in) or can it be over ridden? Be greatful for some help

i just want to get the power_on schematic diagram unit on the mother board of pentium II.

Intresting page!

http://www.sex-sexkontakte.sexschlucht.de

Bob, about your canon mv100.... You don't need any drivers for a firewire connection, that's the good part. You might need some if it has USB-capabilities for still-images, etc. The bad part is that there's multiple firewire drivers, while e.g. Premiere only can work with Microsoft's firewire driver. Have you checked the brand in the Hardware Device Manager? If it says, Texas Instruments or something, it might be the cause of the problem.

The saga of my VO6800 continues. Ive solved the problem on the pause button - I wasnt pumping a signal to the recorder, so it obviously needs the input to trigger it. Dont think me stupid, I just wanted to get the pause of before i tried recording, Now everything works fine except the damn thing wont record anything on tape. It plays my new tape (blacked) fine but sjust shows snow on any section i record. One good sould has already emailed me about cleaning it, which I have done, but playback heads misy be fine anyway to play back the blacked tape. Im using the line in (video in socket) swithced to line) I suspect its a bigger fault than cleaning and would like to try the camera in before throwing this very cheap machine against the wall:) Does anyone know the pins for the camera in. Found something about K socket 14 pin but nothing on Q. It would be nice if the site carried this information. And cleaning instructions for us sad newbies..Thnaks a lot..hoping for replies

David,Camera pin-out, try this : http://www.rcrowley.com/SonyPinout.htm

When you send a signal to the Line-in, does it show at the Line-out? Also, try to get a tape with an image, rather than black, so you can check the actual output. If you want to send a tape to Sydney, I'll record some colourbars on it for you ;-)Cleaning, have you cleaned the erase head - the large static head before the drum?

Thanks Rod, i presume i can just hook up to the video in pins to put a signal in. I'll try cleaning the erase head too. Every little helps.

VO6800 final chapter: Well, I took Alans advice and tried cleaning with paper, Tied camra in though the signal is required to be genlocked, got some pretty lines as a signal. Tried cleaning the erase head, but that must be working because the blacked tape signal is erased. I guess theres just a funny little thing inside not working. Yes Rod I do get a signal on video out but thats a straight connection isnt it, not from the tape. I guess I either find a repairer , but Im guessing that it will be expensive ( I only paid £12 for it) or put it back up on Ebay as spares or repair. Thanks for your help guys, I ll look out for another machine thats sold as working as opposed to "no reason why it shouldnt work"

http://www.gaysex.de.mdvery nice site!

Hello! I need to find a manual for a U-Matic BVU-800, and also need (showing part nos.): a resolution chart, XWV1400RB900; an auto-centering set, YVF8RA0032BN; and, a registration chart, YFV8RA0011A3. I'm also interested in a portable deck with genlock/blackburst. Thanks for any help! My best, Roger Cloud.

<a href="http://www.statusforsale.de">geschenke und geschenkideen</a><br>http://www.statusforsale.de