TechnicalBecause of its age spares are not easy to obtain for the SL-8080.
Fault and repair guide
Tape transport is sluggish or fails to rewindInternally the SL-8080 contains many drive belts which are used in the mechanics of tape transport. With age these belts become slack causing malfunctions and when this happens the whole lot should be replaced. In particular for the rewind function you will need to replace a tyre on the supply reel.
Strange behaviour of capstan/drum servoThe first thing to check is the tantalum capacitors in the servo circuit.
Sluggish threading and capstan problemsThe bottom bearing on the capstan motor is prone to wear and because this motor also drives the threading mechanism threading can become sluggish. When this happens you will hear a horrible squeaking noise!
Quick fault guidePlease click on the button if you are able to contribute a solution to this list or would like to add to, or update PALsite's information on this model. Please note, questions will be removed.
If you have a question about this model, please raise it on the chatpage.
|Colour streaking on playback of pre-recorded tapes||Check for poor contacts or contamination of the presets in the chroma circuit. If necessary clean and re-align.|
|Crackling or noise on sound||Suspect failure of the record/playback switch S601.|
|Intermittently stopping when warm||Check the plug and socket connectors to the end sensor coil. Then check presets RV701 and RV702.|
|Interference on picture||Suspect failure of the record/playback switch S101.|